News

Keywords:Perfluoroethylene propylene (FEP/F46)     PTFE/PTFE/Teflon Series     Soluble polytetrafluoroethylene (PFA)

All
  • All
  • Product Management
  • News
  • Introduction
  • Enterprise outlets
  • FAQ
  • Enterprise Video
  • Enterprise Atlas

Blog

02-08

Pvdf pipe

Pvdf pipe, pvdf medical hose, pvdf hose, pvdf heat shrinkable tube, pvdf corrugated pipe, pvdf rod, pvdf joint, pvdf end plate, pvdf welding rod, etc. can contact Shenzhen dankai. WeChat: xiaohanglee

02-08

Pvdf pipe connection mode

In general, we often use hot air welding connection and hot melt butt connection in PVDF pipeline connection. During the connection process, the temperature of these two connection methods must be appropriate and stable, and attention should be paid to keeping the welding surface clean during welding to avoid doping with many impurities and affecting the performance. It is important to choose the melting state of PVDF pipeline as far as possible in controlling the temperature, and it is better not to have charring, during welding, attention should also be paid to the fact that there is no gap between the two bodies connected.

02-08

What are the application areas of PVDF sheet?

Semiconductor, liquid crystal related devices and other electronic industrial fields, chemical devices, food processing machines, packaging machines, various parts, pipes, seals, pump parts, rotating discs, valves, slide rails, etc.

02-08

Pvdf pipe welding video

Yes

02-08

Pvdf pipe automatic welding machine

The PVDF tubular membrane welding machine has been fine-tuned in configuration. The operation interface adopts a 10.5-inch touch screen. The brand of the detection sensor is Japan's Otis. At the same time, it is also improved on imported equipment, with rolled pipe and welded pipe, and the inner layer can be scraped at one time. It can carry out multi-layer overlap welding and double-layer dislocation welding. It has the function of automatic shearing with fixed length. One to three layers of non-woven fabrics and tubular films with various diameter specifications of 5, 6, 8, 10 and 12.7 can be produced.

01-07

White Teflon board manufacturers

PTFE plate (also called PTFE plate, Teflon plate, Teflon plate) is divided into two kinds of molding and turning. The molded plate is made of PTFE resin at room temperature by molding, and then sintered and cooled. The PTFE turning plate is made of PTFE resin by pressing, sintering and rotary cutting. Its products are widely used and have excellent comprehensive properties: high and low temperature resistance (-192 ℃-260 ℃), corrosion resistance (strong acid, strong alkali, aqua regia, etc.), weather resistance, high insulation, high lubrication, non adhesion, non toxic and other excellent characteristics.
< 1...17181920 >

Consultation

If you want to inquire about our products, please fill in the form below, and we will contact you as soon as possible!