PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
Company Dynamics
22-11
PTFE nano thin film N95 type mask
Nano-film mask is a new type of mask with single-layer nano-PTFE film material as the core filter material, which has excellent ventilation performance and protective performance, reflecting the mainstream development direction of masks in the future.
22-11
The difference between PTFE molded plate and turning plate
The difference between PTFE molded plate and turning plate
22-11
The difference between PTFE molded rod and push rod and the scope of application
PTFE rod is divided into PTFE molded rod and PTFE push rod, the difference is mainly manifested in the difference of the production process. The polytetrafluoroethylene molding rod is made of polytetrafluoroethylene resin at room temperature by molding, and then sintered. The PTFE push rod is made by adding a certain amount of PTFE resin to the extrusion agent, using paste extrusion molding, and then made by high temperature sintering.
22-11
Application of Sealing Device in Petrochemical Industry
As we all know, in the production of petrochemical industry, rotating equipment is a very important part. Its normal and effective operation plays an important role in the whole production system. However, in actual production, there are numerous events that affect production due to the failure of rotating equipment. Some data show that in this kind of fault, especially the leakage caused by seal failure is the main form, accounting for more than 50% of the total fault. Therefore, it is of great significance to understand the history of the development of various types of seals and the factors of use, to analyze and study the problem of seal leakage, to reduce the failure rate and ensure the safe operation of the device.
22-11
What is PCTFE rod? Do you know its characteristics?
PCTFE material, (poly trifluoroethylene) domestic commonly known as: trifluoro, solid density 2.1~2.2, melting point 208~210 ℃. Resistance to heat, acid, alkali and organic solvents (except halides), but not to molten caustic and elemental fluorine. Strong chemical resistance, can be used as engineering plastics.
22-11
Raw materials for PTFE products
Imported brands of PTFE raw materials generally include DuPont, 3M, Daikin, Juhua, etc., while domestic materials mainly include three farmers, Dongyue and so on.
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
