PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
Company Dynamics
24-05
FEP pipe characteristics and size specifications
Characteristics of 1. FEP tube
1. Color of FEP tube
FEP tubes are usually transparent or translucent in color, but color agents can also be added on demand to produce tubes of different colors
24-05
FEP Tube Characteristics and Application Scenarios
The full name of FEP is Fluorinated ethylene propylene, which translates as fluorinated ethylene propylene copolymer (perfluoroethylene propylene copolymer). FEP is a copolymer of tetrafluoroethylene and hexafluoropropylene. The FEP crystals had a melting point of 304 ° C. and a density of 2.15g/cc. FEP can be applied to soft plastics, its tensile strength, wear resistance, creep resistance is lower than many engineering plastics
2. FEP tube characteristics:
24-05
PTFE pipe standards and characteristics
Teflon pipe is a pipe made of high quality materials through a special process. It is very strong and can withstand not only a positive pressure of up to 1.6 MPa, but also a negative pressure of -7 7千帕. This kind of pipe can work normally between extremely low -80 ℃ and extremely high 260 ℃, and it is particularly resistant to corrosion. It is very suitable for transporting gases or liquids that are both hot and extremely corrosive. Other ordinary pipelines cannot do this.
24-05
Characteristics and Application of Black FEP Heat Shrinkable Tube
The black version of FEP, all called fluorinated ethylene propylene copolymer, is made by adding an appropriate amount of carbon black or other black pigment to the base FEP material. This not only changes its appearance, but more importantly, gives the black FEP heat shrinkable tube some special performance advantages:
Ultraviolet protection: Black has natural light absorption and can effectively block ultraviolet rays, which is essential for electronic equipment and circuits used outdoors, and can prevent material aging and performance degradation caused by sunlight.
24-05
Application of FEP Heat Shrinkable Tube in Electrical and Electronic Industry
FEP, all called fluorinated ethylene propylene copolymer, is a high-performance fluoroplastic material known for its excellent chemical resistance, electrical insulation and transparency. FEP heat shrinkable tube, as the name suggests, is a kind of pipe that can be compressed to the original size by heating, and is widely used in the protection and optimization of electronic and electrical products.
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
