PTFE corrugated pipe price
Classification:
FAQ
Author:
PTFE tube little sister
Source:
PTFE tube little sister
Release time:
2003-12-12
Visits:
PTFE corrugated pipe price
Polytetrafluoroethylene bellows refers to a tubular elastic sensitive element connected by a foldable wrinkle sheet along the direction of folding and stretching. Bellows are widely used in instrumentation, the main purpose is as a pressure measuring instrument measuring element, the pressure into displacement or force. The corrugated pipe wall is thin, the sensitivity is high, and the measuring range is tens of Pa to tens of MPa.
Its open end is fixed, the sealing end is in a free state, and the auxiliary coil spring or reed is used to increase the elasticity. When working, it elongates along the length of the pipe under the action of internal pressure, so that the movable end produces a certain relationship with the pressure. The movable end drives the pointer to directly indicate the size of the pressure.
The bellows is often combined with a displacement sensor to form a pressure sensor with an electrical output, and sometimes also used as an isolation element. Since the expansion of the bellows requires a large volume change, its response speed is lower than that of the Baudon tube. The bellows is suitable for measuring low pressures.
Teflon tube, scientific name Teflon tube (hereinafter referred to as F4 tube, Teflon tube) is a high-quality plunger extrusion tube, using special processing technology, so that the steel tube and plastic tube are closely combined, can bear positive pressure of 1.6Mpa, negative pressure: 77Kpa; It can be used normally at -60 ℃ ~ 260 ℃ and has reliable and excellent corrosion resistance. Transporting strong corrosive gases and liquids at high temperatures, which cannot be replaced by other pipelines.
PTFE tubes are extruded tubes, corrugated tubes, heat shrinkable tubes, plates, rods, films and other products, different products have different applications.
polytetrafluoroethylene corrugated pipe characteristics:
1. The use of a wide range of temperature (from -200 degrees Celsius to 260 degrees)
2. It is basically resistant to all chemicals except some fluorides and alkaline liquid metals.
3. Excellent mechanical properties including aging resistance especially for bending and swinging applications.
4. Outstanding flame retardancy.
5. Excellent insulation characteristics (regardless of its frequency and temperature)
6. The water absorption rate is extremely low, and has a series of unique properties such as self-lubricating and non-stick
Shenzhen Dankai Technology Co., Ltd. (ShenZhen DanKai Technology Co., Ltd.), whose predecessor was the Fluoroplastic Material Factory of Dongguan Dandi Insulation Material Co., Ltd. established in 1998, specializes in the research and development, production and sales of FEP, PFA, PTFE and other fluoroplastic tube rod sheet membrane products and other insulation materials. The company has international standards of senior R & D team and the introduction of foreign fluorine plastic products production line. Some fluoroplastic products through ISO9001, SGS, FDA certification, Huawei, Foxconn, the United States, ZTE, Intel, AirTAC and other domestic and foreign cooperation customers fully affirmed. The company's main products are: ① pipes: Ptfe pipes, Fep pipes, Pfa pipes, Pvdf pipes; ② Heat shrinkable tubes: Ptfe heat shrinkable tubes, Fep heat shrinkable tubes, Pfa heat shrinkable tubes, Pvdf heat shrinkable tubes; ③ Plate rod film: Ptfe plate rod film, Feep plate rod film, Pfa plate rod film, Pvdf plate rod film, etc. PE: PE, special, spiral tube, spring tube, rotary cutting tube, welding rod, tee, straight, gasket, joint, cone rod, flared tube, sealing tube, braided tube, corrugated tube, etc. At the same time can be customized according to customer requirements processing production of various specifications of fluorine plastic products.
Key words:
Next Page