PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
Teflon tube pressure how much? Teflon tube specifications?
Classification:
Company Dynamics
Industry dynamics
Author:
Dankai
Source:
Dankai
Release time:
2021-12-07
Visits:
1. Teflon tube
Teflon tube/PTFE tube/Teflon tube/Teflon tube name: PTFE tube, F4 tube, Teflon tube, Teflon tube, Teflon tube, Teflon tube, Teflon tube, Teflon tube, Teflon tube, Teflon tube, Teflon tube, Teflon tube, Teflon tube, PTFE tube, plastic king tube.
How much pressure can the 2. Teflon tube withstand? How much pressure can the Dankai Teflon tube withstand
Please refer to the article: "The old master takes you to understand the pressure resistance of Teflon pipes? Including: working pressure, blasting pressure?"
The pressure resistance of Teflon pipe needs to be calculated first. Generally, the working pressure of Teflon pipe is 1/4-1/3 of the blasting pressure.
Other factors affecting the pressure of Teflon tube:
1, concentricity. The concentricity refers to the ratio of the minimum wall thickness to the maximum wall thickness of the Teflon tube.
2. Change of tensile strength
3. Temperature
4. Other environmental factors
5, other
The above data for a certain raw material production of Teflon tube, the tensile strength is slightly different. Teflon pipe has three data: inner diameter, outer diameter and wall thickness. Products of different specifications have different pressure resistance. If you are not clear about your needs, you can directly consult your younger sister of Teflon pipe.
Figure 1: Teflon Tube Source: Dankai
3. Teflon tube temperature resistance
Use temperature:-200 degrees to 260 degrees
4. Teflon tube specifications
Teflon tube/PTFE tube/PTFE tube/PTFE tube/Teflon tube common specifications: inner diameter * outer diameter (unit: mm) other specifications can be customized
Metric: 2*4 3*5 4*6 5*7 6*8 8*10 8*12 9*12 10*12 12 12*14 14*16*18 18*20
Imperial: 1/8 inch (1.6*3.2)1/4(3.96*6.35)3/8(6.35*9.525)1/2 inch (9.5*12.7)3/4(15.88*19.05)1(22.2*25.4)
Dankai can produce specifications with an inner diameter of 0.5mm to 200mm and a wall thickness of 0.12mm to 3mm.
Shenzhen Dan Kai Technology Co., Ltd., specializing in FEP, PFA, PTFE, PVDF and other fluorine plastic tube rod sheet membrane products and other insulation materials research and development, production, sales and service of intelligent manufacturing enterprises.
ShenZhen DanKai Technology Co.,ltd. is an intelligent manufacturing enterprise specializing in the R & D, production, sales and service of FEP, PFA, PTFE,PVDF and other fluoroplastic tube, bar, sheet and film products as well as other insulating materials.
This article is originally created by Teflon's little sister. Welcome to pay attention and take you to grow knowledge together!
Key words:
Teflon, ptfe, pressure resistant, specification, 12, other, pressure, inner diameter, teflon
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
