PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
The difference between polytetrafluoroethylene and polyethylene
Classification:
Industry dynamics
Author:
FEP tube little sister
Source:
FEP tube little sister
Release time:
2019-03-18
Visits:
The difference between polytetrafluoroethylene and polyethylene
Polytetrafluoroethylene [PTFE,F4] is one of the best corrosion resistance materials in the world, so it is known as the "plastic king. Polytetrafluoroethylene is a polymer of tetrafluoroethylene, abbreviated as PTFE, and the trade name is "Teflon". The basic structure of PTFE is:-CF2-CF2-CF2-CF2-CF2-CF2-CF2-CF2-CF2-CF2-. Polytetrafluoroethylene is widely used in various places where anti-acid and alkali and organic solvents are required. It is not toxic to humans, but one of the raw materials used in the production process, perfluorooctanoic acid ammonium (PFOA), is considered to be carcinogenic. It can work for a long time at a temperature of 250 ℃ to -180 ℃, and can withstand all other chemicals except molten metal sodium and liquid fluorine.
Polyethylene: PE for short, is a thermoplastic resin made by polymerization of ethylene. It has excellent low temperature resistance (the lowest use temperature can reach -70 ~-100 ℃), good chemical stability, and can resist the erosion of most acids and bases (not resistant to acids with oxidizing properties). Insoluble in general solvents at room temperature, small water absorption, excellent electrical insulation performance; but polyethylene for environmental stress (chemical and mechanical effects) is very sensitive, poor heat aging. The properties of polyethylene vary from species to species, depending mainly on the molecular structure and density.
Short form: nCH2 = CH2 →
Divided into high pressure method, low pressure method, medium pressure method three. High pressure process for the production of low density polyethylene
The properties of polyethylene vary from species to species, depending mainly on the molecular structure and density.
Types of Polyethylene
(1)LDPE: low density polyethylene, high pressure polyethylene
(2)LLDPE: linear low density polyethylene
(3)MDPE: medium density polyethylene, bimodal resin
(4)HDPE: high density polyethylene, low pressure polyethylene
(5)UHMWPE: ultra high molecular weight polyethylene
(6) Modified polyethylene: CPE, cross-linked polyethylene (PEX)
Shenzhen Dan Kai Technology Co., Ltd. specializes in the production of FEP, PFA, PTFE and other fluorine plastic tube rod sheet membrane products and other insulating materials. At present, the key products are:
Teflon tube class: Ptfe tube, Fep tube, Pfa tube, Pvdf tube
Teflon heat shrinkable tube: Ptfe heat shrinkable tube, Fep heat shrinkable tube, Pfa heat shrinkable tube, Pvdf heat shrinkable tube
Teflon plate rod film category: Ptfe plate rod film, Fep plate rod film, Pfa plate rod film, Pvdf plate rod film
Insulation materials: silicone, PE, PVC, UPE, etc
Special category: PFA inlet joint, spiral tube, spring tube, rotary cutting tube, welding rod, tee, straight, gasket, joint, cone rod, flared tube, sealing tube, braided tube, corrugated tube, etc
Key words:
Previous Page
Next Page
Previous Page
Next Page
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
