PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
Company Dynamics
22-11
Performance and Application of FEP Poly (ethylene-propylene fluoride)
FEP is an important TFE copolymer. Its performance is 50 degrees Celsius lower than PTFE in the highest operating temperature, and other properties are equivalent to PTFE. It is widely used in electronic, electrical, chemical and other industries, especially in high-performance, high quality wire and cable preparation, communications, aerospace, precision instruments and other fields.
22-11
Analysis of PTFE Extrusion Tube Type and Application
Most tubes manufactured by PTFE paste extrusion are thin-walled tubes (wall thickness less than 8mm) with diameters ranging from a few millimeters to a few centimeters.
Main applications: medical fluid delivery, jet engine fuel delivery and hydraulic transmission.
22-11
Classification of PTFE gaskets and classification of PTFE seals
PTFE gasket is a good gasket sealing material, is a polymer compound made of tetrafluoroethylene polymerization, can be used in any kind of chemical medium for a long time. Reliable sealing performance, which is due to its main material PTFE itself has the best corrosion resistance and not aging, after special processing has good creep resistance and cold flow resistance, electrical insulation and anti-sticking.
22-11
Process Analysis of PTFE Rod Quality Problems
Teflon rods include Teflon molded rods, Teflon plunger extruded rods and Teflon paste extruded rods. This paper mainly analyzes the quality problems of PTFE plunger extrusion rod.
22-11
Processing and Application of PTFE
Processing and Application of PTFE
22-11
What are the differences between PTFE films? What are the common quality problems?
PTFE film is made by turning the suspended PTFE resin molding blank. The film after turning is an unoriented film, and the unoriented film is rolled into an oriented film with a thickness of less than 0.5mm by a two-roll calender. According to the different degree of orientation, it can be divided into orientation degree is greater than 2.0, calender is relatively high is the orientation film, orientation degree is less than 2.0, calender is relatively low is semi-oriented film.
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
