PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
PTFE and perfluoro rubber how to choose?
Classification:
Company Dynamics
Author:
Source:
Release time:
2024-06-10
Visits:
Characteristics of 1. PTFE (polytetrafluoroethylene)
PTFE is a thermoplastic with the following properties:
Non-stick: PTFE has a very smooth surface with excellent non-stick properties, making it an ideal material for making non-stick pans and other non-stick coatings.
Chemical Stability: PTFE is resistant to almost all chemicals, including strong acids, strong bases and organic solvents.
High temperature resistance: PTFE can be used for a long time in the temperature range of -80 ℃ to 260 ℃, and can withstand temperatures up to 300 ℃ in a short time.
Wear resistance: PTFE has excellent wear resistance and is suitable for manufacturing bearings and seals.
Electrical insulation: PTFE is a good electrical insulation material.
Characteristics of 2. perfluoro rubber
Perfluoroelastomer is an elastomer with the following properties:
Elasticity: Perfluoroelastomer has good elasticity and can withstand large deformation without permanent deformation.
Chemical resistance: Similar to PTFE, perfluoroelastomer has excellent resistance to most chemicals.
High temperature resistance: Perfluoroelastomer can be used in the temperature range of -20 ℃ to 200 ℃, and some special formulations can withstand up to 300 ℃.
Oil resistance: Perfluoroelastomer has good resistance to oils and is suitable for oil seals and seals.
Radiation resistance: Perfluoroelastomer has high resistance to radiation and is suitable for the nuclear industry and aerospace.
3. selection recommendations
When selecting PTFE and perfluoroelastomer, the following factors should be considered:
Application environment: If the application environment requires high temperature resistance, corrosion resistance and non-viscous requirements, PTFE is a better choice. If elasticity and oil resistance are required, perfluoro rubber may be more suitable.
Temperature range: The upper limit of the long-term use temperature of PTFE is higher than that of perfluoro rubber. If the application environment temperature is higher, PTFE should be given priority.
Cost: PTFE is generally less expensive than perfluoroelastomer, and if cost is one of the considerations, PTFE may be a more economical option.
Processing method: PTFE can be processed by extrusion, molding and other methods, and perfluoroelastomer is more suitable for vulcanization molding. According to the needs of the processing technology, select the appropriate material.
Physical properties: If good elasticity and deformation recovery are required, perfluoroelastomer is a better choice.
Special requirements: For applications that require special requirements such as radiation resistance and resistance to special chemicals, perfluoroelastomers may be more suitable.
To sum up, PTFE and perfluoroelastomer have their own advantages, and the choice needs to be determined according to specific application requirements, environmental conditions, cost budget and processing technology. By considering these factors, you can ensure that the most suitable material is selected to meet the performance requirements of a specific application.
This article is originally created by Teflon's little sister. Welcome to pay attention and take you to grow knowledge together!
Key words:
Previous Page
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
