PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
Stainless steel teflon tube
Classification:
Industry dynamics
Author:
PTFE tube little sister
Source:
PTFE tube little sister
Release time:
2003-07-09
Visits:
1. stainless steel teflon tube
Stainless steel Teflon pipe is also called Teflon metal braided pipe. Its scientific name is polytetrafluoroethylene, and its English names are PTFE and F4. The stainless steel Teflon pipe metal braided hose assembly is a polytetrafluoroethylene inner pipe treated by a special process. The outer jacket and both ends of the stainless steel wire reinforcement layer are composed of metal joints.
Features: aging resistance, corrosion resistance, high and low temperature resistance (-196 ℃ ~ 420 ℃), small size, good flexibility, light weight (relative to the rubber hose with the same working pressure) can be used as the key to the medium transmission of liquid and gas systems.
Main purpose:
Conveying corrosive chemical media or organic solvents. (e. g. nitrogen water, acetone, etc.)
2. transport high temperature gas, hot oil and other high temperature medium (such as: hot steam, heat transfer oil, etc.)
3. Transport low temperature or ultra-low temperature medium (such as liquid nitrogen)
4. High temperature environment transport water, gasoline and other media. (e. g. steam system and hydraulic system in steelmaking, coking and continuous casting equipment)
5. Pipelines that need shock absorption or noise elimination (such as the inlet and outlet of the pump)
Transmission fittings for hydraulic, servo control, lubricating oil and fuel systems of aviation and aerospace vehicles
2. guangdong teflon tube which is good?
Comparing goods with goods is the shopping habit of most people. They compare price, quality, service and after-sales service. They spend a lot of time consulting, understanding and getting better. Therefore, in the early stage of procurement, we need to spend a lot of time to make comparisons. These comparisons require excellent judgment. In the 21st century of information explosion, many people will accidentally fall into the trap of low price and poor quality.
3. temperature resistant Teflon
Teflon's scientific name is polytetrafluoroethylene, and its alias has many names, such as Teflon, Teflon, Teflon, etc., abbreviated as Teflon or [PTFE,F4]). What everyone needs Teflon is most concerned about is the high temperature resistance. Teflon's high temperature resistance is negative 180 ℃ to positive 260 ℃. It can work at freezing temperature without embrittlement and melting at high temperature. Teflon has the characteristics of corrosion resistance, aging resistance, non-stick, self-lubricating, and good insulation. Due to the excellent performance of Teflon tubes, it is now widely used in chemical industry, machinery, electronics, medicine, aviation and other fields.
Figure 1: Teflon tube Source: Shenzhen Dankai
Teflon tube performance parameters
1. Withstand voltage: 150V-600V
2. Working temperature:-180 ℃ ~ 260 ℃
3. Melting point: 327 ℃
4. Flame retardancy: VW-1
5. Breakdown strength: 26KV/mm
6. Color: transparent, translucent, milky white.
Shenzhen Dankai Technology Co., Ltd. (ShenZhen DanKai Technology Co., Ltd.), whose predecessor was the Fluoroplastic Material Factory of Dongguan Dandi Insulation Material Co., Ltd. established in 1998, specializes in the research and development, production and sales of FEP, PFA, PTFE and other fluoroplastic tube rod sheet membrane products and other insulation materials. The company has international standards of senior R & D team and the introduction of foreign fluorine plastic products production line. Some fluoroplastic products through ISO9001, SGS, FDA certification, Huawei, Foxconn, the United States, ZTE, Intel, AirTAC and other domestic and foreign cooperation customers fully affirmed. The company's main products are: ① pipes: Ptfe pipes, Fep pipes, Pfa pipes, Pvdf pipes; ② Heat shrinkable tubes: Ptfe heat shrinkable tubes, Fep heat shrinkable tubes, Pfa heat shrinkable tubes, Pvdf heat shrinkable tubes; ③ Plate rod film: Ptfe plate rod film, Feep plate rod film, Pfa plate rod film, Pvdf plate rod film, etc. PE: PE, special, spiral tube, spring tube, rotary cutting tube, welding rod, tee, straight, gasket, joint, cone rod, flared tube, sealing tube, braided tube, corrugated tube, etc. At the same time can be customized according to customer requirements processing production of various specifications of fluorine plastic products.
Key words:
Previous Page
Previous Page
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
