PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
Ptfe high pressure multi-function hose
Classification:
Industry dynamics
Author:
PFA tube little sister
Source:
PFA tube little sister
Release time:
2004-08-29
Visits:
1. Ptfe high pressure multi-function hose
PTFE (polytetrafluoroethylene), commonly known as "plastic king", is a polymer compound formed by the polymerization of tetrafluoroethylene, which has excellent chemical stability, corrosion resistance, sealing, high lubrication and non-stick, electrical insulation and good aging resistance. Used as engineering plastics, it can be made into PTFE tubes, rods, belts, plates, films, etc. It is generally used in corrosion-resistant pipes, containers, pumps, valves, radar, high-frequency communication equipment, radio equipment and so on.
Ptfe high-pressure multi-function hose has been widely used in aviation, aerospace, atomic energy, electronics, electrical appliances, chemicals, machinery, construction, textile, medicine and other industrial sectors. In particular, the industrial application of PTFE materials in anti-corrosion has greatly promoted the development of the chemical industry.
Ptfe high-pressure multifunctional hose can transport 99% of corrosive chemicals: anti-strong acid, strong alkali, anti-various organic solvents, anti-strong oxidant, the king of internal glue PTFE plastic. Kan
Ptfe high-pressure multi-function hose working temperature:-40°C ~ 260°C
Ptfe High Pressure Multifunctional Hose Features:
1. Excellent heat resistance, chemical resistance, sliding, non-adhesive, current insulation, weather resistance.
2. The color varies according to the size, which is translucent ~ Milky White.
3. Can also manufacture colored products (black, white, red, blue, green, yellow, orange, gray)
Figure 1:Ptfe High Pressure Multifunctional Hose Source: Shenzhen Dankai
2. pfa liquid level display tube
PFA liquid level display is used to visually observe the liquid level in the equipment, including frosting liquid level indicator, glass tube liquid level indicator, oil bag liquid level indicator, remote liquid level indicator, etc.
The measured medium of PFA liquid level display tube is water, oil, acid, alkali, industrial sewage and other conductive and non-conductive liquids. It is widely used in the automatic control system in the fields of petroleum, chemical industry, power station, metallurgy, light industry, pharmacy, papermaking, food and waterworks and sewage treatment. It mainly measures the medium in a variety of closed and airtight containers, underground pools and sinks.
Seeing the measured object of the PFA liquid level display tube, we know that the PFA tube must meet the characteristics of acid and alkali resistance, corrosion resistance, aging resistance, friction resistance, and high transparency.
PFA plastic is a copolymer of a small amount of perfluoropropyl perfluorovinyl ether and polytetrafluoroethylene. The melt cohesiveness is enhanced, the solution viscosity is reduced, and the performance is unchanged compared with PTFE. This kind of resin can be directly processed into products by ordinary thermoplastic molding methods. Suitable for the production of corrosion-resistant parts, anti-wear parts, seals, insulation and medical equipment parts, high-temperature wires, cable insulation, anti-corrosion equipment, sealing materials, pump valve bushings, and chemical containers.
Figure 2:pfa liquid level display tube source: shenzhen dankai
PFA product features:
1. It is a copolymer of a small amount of perfluoropropyl perfluorovinyl ether and polytetrafluoroethylene. The melt cohesiveness is enhanced, the solution viscosity is reduced, and the performance is unchanged compared with PTFE. This kind of resin can be directly processed into products by ordinary thermoplastic molding methods.
2, long-term use temperature -196-260 degrees, has excellent chemical resistance, corrosion resistance to all chemicals, the friction coefficient is the lowest in plastics, there are good electrical properties, its electrical insulation is not affected by temperature, known as "plastic king.
3, its chemical resistance is similar to polytetrafluoroethylene, better than vinylidene fluoride.
4, its creep resistance and compression strength are better than PTFE, high tensile strength, elongation up to 100-300%. Good dielectric properties, excellent radiation resistance. Flame retardant up to V0 level.
5, suitable for the production of corrosion-resistant parts, wear parts, seals, insulation parts and medical equipment parts.
6, high temperature wire, cable insulation, anti-corrosion equipment, sealing materials, pump valve bushing, and chemical containers.
Shenzhen Dankai Technology Co., Ltd. (ShenZhen DanKai Technology Co., Ltd.), whose predecessor was the Fluoroplastic Material Factory of Dongguan Dandi Insulation Material Co., Ltd. established in 1998, specializes in the research and development, production and sales of FEP, PFA, PTFE and other fluoroplastic tube rod sheet membrane products and other insulation materials. The company has international standards of senior R & D team and the introduction of foreign fluorine plastic products production line. Some fluoroplastic products through ISO9001, SGS, FDA certification, Huawei, Foxconn, the United States, ZTE, Intel, AirTAC and other domestic and foreign cooperation customers fully affirmed. The company's main products are: ① pipes: Ptfe pipes, Fep pipes, Pfa pipes, Pvdf pipes; ② Heat shrinkable tubes: Ptfe heat shrinkable tubes, Fep heat shrinkable tubes, Pfa heat shrinkable tubes, Pvdf heat shrinkable tubes; ③ Plate rod film: Ptfe plate rod film, Feep plate rod film, Pfa plate rod film, Pvdf plate rod film, etc. PE: PE, special, spiral tube, spring tube, rotary cutting tube, welding rod, tee, straight, gasket, joint, cone rod, flared tube, sealing tube, braided tube, corrugated tube, etc. At the same time can be customized according to customer requirements processing production of various specifications of fluorine plastic products.
Key words:
Next Page
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
