PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
Introduction to the scope of use of white Teflon winding pipe
Classification:
Industry dynamics
Author:
PTFE tube little sister
Source:
PTFE tube little sister
Release time:
2006-03-03
Visits:
1. Name of Teflon winding pipe:Teflon winding pipe, Teflon bobbin pipe, Teflon winding pipe, Teflon pipe line protection pipe
2. Teflon winding tube color:
Commonly used color: white, black;
Not commonly used color: yellow, brown, green, blue, other colors can be customized
3. Characteristics of Teflon winding pipe
Common features:
Use temperature:-200 degrees to 260 degrees
Easy processing: can flanging, welding
Aging resistance: can be exposed to ozone and sunlight for a long time without aging
Corrosion resistance: able to withstand all strong acids, strong oxidants, strong reducing agents and various organic solvents except molten alkali metals, fluorinated media and those above 300 °
The product features of Teflon winding pipe are as follows:
1, feel good, no smell
2. High temperature resistance
3, with high insulation
4. Wear resistance
5. Flame retardant
6. Anti-aging
7. Environmental protection
8. Tensile
9. Resistant to fire
10. High pressure resistance
Infrequently used features:
Density: 2.14-2.17g/cm3
Volume resistance> 1 × 1018
Surface resistance> 2 × 1013
Arc resistance> 165 seconds no leakage
Low water absorption: water absorption <0.1%
Lower coefficient of friction: smaller coefficient of friction
Incombustible: the air will not burn, in line with the strict requirements of the fire place;
Figure 1: Teflon winding pipe Source: Shenzhen Dankai
Non-toxic: five toxic tasteless, with physiological inertia, no harm to people and the environment
4. Common specifications of Teflon winding pipe: inner diameter * outer diameter (unit: mm)
Metric: 2*4 3*5 4*6 5*7 6*8 8*10 8*12 9*12 10*12
12*1414*16 16*18 18*20
Imperial: 1/8 inch (1.6*3.2)1/4(3.96*6.35)3/8(6.35*9.525)
1/2 inch (9.5*12.7)3/4(15.88*19.05)1(22.2*25.4)
Can produce specifications, inner diameter 0.5mm to inner diameter 200mm, wall thickness 0.12mm to 3mm
5. Purpose
1. Optical fiber protective sleeve
2. Cable protection
3. Wire protection
4. Protective cover of lighting equipment
5. Jumper protective sleeve
Shenzhen Dankai Technology Co., Ltd. (ShenZhen DanKai Technology Co., Ltd.), whose predecessor was the Fluoroplastic Material Factory of Dongguan Dandi Insulation Material Co., Ltd. established in 1998, specializes in the research and development, production and sales of FEP, PFA, PTFE and other fluoroplastic tube rod sheet membrane products and other insulation materials. The company has international standards of senior R & D team and the introduction of foreign fluorine plastic products production line. Some fluoroplastic products through ISO9001, SGS, FDA certification, Huawei, Foxconn, the United States, ZTE, Intel, AirTAC and other domestic and foreign cooperation customers fully affirmed. The company's main products are: ① pipes: Ptfe pipes, Fep pipes, Pfa pipes, Pvdf pipes; ② Heat shrinkable tubes: Ptfe heat shrinkable tubes, Fep heat shrinkable tubes, Pfa heat shrinkable tubes, Pvdf heat shrinkable tubes; ③ Plate rod film: Ptfe plate rod film, Feep plate rod film, Pfa plate rod film, Pvdf plate rod film, etc. PE: PE, special, spiral tube, spring tube, rotary cutting tube, welding rod, tee, straight, gasket, joint, cone rod, flared tube, sealing tube, braided tube, corrugated tube, etc. At the same time can be customized according to customer requirements processing production of various specifications of fluorine plastic products.
Key words:
Next Page
Next Page
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
