PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
Dongguan Teflon Tube Manufacturers
Classification:
Industry dynamics
Author:
PTFE tube little sister
Source:
PTFE tube little sister
Release time:
2006-03-03
Visits:
1. Dongguan Teflon Tube Manufacturers
Teflon tube, scientific name Teflon tube (hereinafter referred to as F4 tube, Teflon tube) is a high-quality plunger extrusion tube, using special processing technology, so that the steel tube and plastic tube are closely combined, can bear positive pressure of 1.6Mpa, negative pressure: 77Kpa; It can be used normally at -60 ℃ ~ 260 ℃ and has reliable and excellent corrosion resistance. Transporting strong corrosive gases and liquids at high temperatures, which cannot be replaced by other pipelines. Widely used in machinery, chemical industry, aviation, electrical and electronics, national defense industry, cutting-edge technology, medical and health and electrical insulation and other fields.
PTFE tube uses: wire insulation sheath, corrosive fluid medium pipeline, a variety of high frequency use of electrical insulation parts, etc.
Teflon tube features: Teflon tube has excellent chemical stability, can withstand all strong acids, strong bases, strong oxidants, and various organic solvents do not occur.
PTFE tube has a wide range of temperature, and can be applied to -180 ℃ ~ 250 ℃ for a long time under normal pressure. After being treated at 250 ℃ for 1000h, its mechanical properties change very little.
Teflon tube has a very low friction coefficient, is a good antifriction, self-lubricating material, its static friction coefficient is less than the dynamic friction coefficient, so used to make bearings have the advantages of small starting resistance, smooth operation. Because PTFE is non-polar, heat-resistant and non-absorbent, it is also an excellent electrical insulating material. Also has excellent aging resistance, non-sticky and non-flammable.
The bars, pipes, films, bearings, gaskets, valves and other special-shaped materials and parts are widely used in machinery, chemical industry, aviation, electrical and electronics, national defense industry, cutting-edge technology, medical and health, electrical insulation and other fields.
Figure 1: PTFE tube Source: Shenzhen Dankai
2. Guangzhou Teflon pipe manufacturers
Teflon (sleeve) tube is made of polytetrafluoroethylene (PTFE commonly known as Teflon, plastic king) material after extrusion sintering, drying, high temperature sintering, stereotypes and other processes made of special pipe. Teflon is also called Teflon, Teflon, Teflon, Teflon, Teflon, Teflon, PTFE, Plastic King, English is Teflon, which is widely used in machinery, electronic appliances, automobiles, aerospace, chemicals, computers, Electric heating, military, communications and other important scientific and technological industries, such as micro transformers.
Teflon tube performance: the use of a wide range of temperature (from -200 degrees Celsius to 260 degrees). What a loss.
Teflon tubes are basically resistant to all chemicals except some fluorides and alkaline liquid metals. Excellent mechanical properties include aging resistance especially for bending and swinging applications. What a loss.
Teflon tubes have outstanding flame retardancy (in accordance with ASTM-D635 and D470 test procedures, and are specified as flame retardant materials in air. Excellent insulation properties (regardless of frequency and temperature). Kan
Teflon tube water absorption rate is very low, and has a series of unique properties such as self-lubricating and non-stick. Low friction coefficient and excellent wear resistance.
Teflon pipe applications: seal/gasket, ring material, wear plate/seat, insulation parts, corrosion resistance industry, mechanical parts, lining, oil and gas, petrochemical industry, chemical industry, instrument and equipment manufacturers.
Figure 2: Teflon tube Source: Shenzhen Dankai
Shenzhen Dankai Technology Co., Ltd. (ShenZhen DanKai Technology Co., Ltd.), whose predecessor was the Fluoroplastic Material Factory of Dongguan Dandi Insulation Material Co., Ltd. established in 1998, specializes in the research and development, production and sales of FEP, PFA, PTFE and other fluoroplastic tube rod sheet membrane products and other insulation materials. The company has international standards of senior R & D team and the introduction of foreign fluorine plastic products production line. Some fluoroplastic products through ISO9001, SGS, FDA certification, Huawei, Foxconn, the United States, ZTE, Intel, AirTAC and other domestic and foreign cooperation customers fully affirmed. The company's main products are: ① pipes: Ptfe pipes, Fep pipes, Pfa pipes, Pvdf pipes; ② Heat shrinkable tubes: Ptfe heat shrinkable tubes, Fep heat shrinkable tubes, Pfa heat shrinkable tubes, Pvdf heat shrinkable tubes; ③ Plate rod film: Ptfe plate rod film, Feep plate rod film, Pfa plate rod film, Pvdf plate rod film, etc. PE: PE, special, spiral tube, spring tube, rotary cutting tube, welding rod, tee, straight, gasket, joint, cone rod, flared tube, sealing tube, braided tube, corrugated tube, etc. At the same time can be customized according to customer requirements processing production of various specifications of fluorine plastic products.
Key words:
Next Page
Next Page
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
