PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
The difference between Ptfe Teflon tube and nylon tube
Classification:
Industry dynamics
Author:
PTFE tube little sister
Source:
PTFE tube little sister
Release time:
2008-04-19
Visits:
The difference between Ptfe Teflon tube and nylon tube
Teflon (sleeve) tube is made of polytetrafluoroethylene (PTFE commonly known as Teflon, plastic king) material after extrusion sintering, drying, high temperature sintering, stereotypes and other processes made of special pipe. Teflon is also called Teflon, Teflon, Teflon, Teflon, Teflon, Teflon, PTFE, Plastic King, English is Teflon, which is widely used in machinery, electronic appliances, automobiles, aerospace, chemicals, computers, Electric heating, military, communications and other important scientific and technological industries, such as micro transformers.
Nylon is an outstanding American scientist Carrothers (Carothers) and under the leadership of a scientific research team developed, is the world's first synthetic fiber. The emergence of nylon makes textiles look new, its synthesis is a major breakthrough in the synthetic fiber industry, but also an important milestone in polymer chemistry.
Teflon density is generally greater than 2, while the density of nylon is about 1.2. The density of ptfe Teflon tube is relatively dense, and the high temperature resistance and hardness are relatively good, while nylon tube is relatively soft, and the high temperature resistance is worse than ptfe Teflon tube, but because it is relatively soft, it can adapt to more terrains. price ptfe teflon tube slightly more expensive than nylon.
Teflon tube product features
1. High chemical stability: It can withstand all strong acids, including aqua regia, hydrofluoric acid, concentrated hydrochloric acid, nitric acid, fuming sulfuric acid, organic acids, strong bases, strong oxidants, reducing agents and various organic solvents. Ideal for high purity chemical feeding use.
2. Low friction coefficient: The friction coefficient is generally only 0.04, which is a very excellent self-lubricating material, and the friction coefficient does not change with temperature. 3
3. Excellent anti-adhesion, the inner wall of the tube is not easy to adhere to colloids and chemicals.
4, excellent aging resistance, can be used outdoors for a long time.
5. Excellent electrical insulation properties: PTFE is a highly non-polar material with good dielectric properties, great resistance, and a dielectric constant of about 2.0, which is the smallest among all electrical insulation materials.
Part of the tube has high transparency and can easily observe the internal fluid condition.
Teflon tube performance parameters
1. Withstand voltage: 150V-600V
2. Working temperature:-80 ℃ ~ 260 ℃
3. Melting point: 327 ℃
4. Flame retardancy: VW-1
5. Breakdown strength: 26KV/mm
6. Color: transparent, translucent, milky white.
Shenzhen Dankai Technology Co., Ltd. (ShenZhen DanKai Technology Co., Ltd.), whose predecessor was the Fluoroplastic Material Factory of Dongguan Dandi Insulation Material Co., Ltd. established in 1998, specializes in the research and development, production and sales of FEP, PFA, PTFE and other fluoroplastic tube rod sheet membrane products and other insulation materials. The company has international standards of senior R & D team and the introduction of foreign fluorine plastic products production line. Some fluoroplastic products through ISO9001, SGS, FDA certification, Huawei, Foxconn, the United States, ZTE, Intel, AirTAC and other domestic and foreign cooperation customers fully affirmed. The company's main products are: ① pipes: Ptfe pipes, Fep pipes, Pfa pipes, Pvdf pipes; ② Heat shrinkable tubes: Ptfe heat shrinkable tubes, Fep heat shrinkable tubes, Pfa heat shrinkable tubes, Pvdf heat shrinkable tubes; ③ Plate rod film: Ptfe plate rod film, Feep plate rod film, Pfa plate rod film, Pvdf plate rod film, etc. PE: PE, special, spiral tube, spring tube, rotary cutting tube, welding rod, tee, straight, gasket, joint, cone rod, flared tube, sealing tube, braided tube, corrugated tube, etc. At the same time can be customized according to customer requirements processing production of various specifications of fluorine plastic products.
Key words:
Previous Page
Previous Page
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
