PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
Guangdong teflon tube which is good?
Classification:
Industry dynamics
Author:
PFA tube little sister
Source:
PFA tube little sister
Release time:
2008-09-17
Visits:
guangdong teflon tube which is good?
Comparing goods with goods is the shopping habit of most people. They compare price, quality, service and after-sales service. They spend a lot of time consulting, understanding and getting better. Therefore, in the early stage of procurement, we need to spend a lot of time to make comparisons. These comparisons require excellent judgment. In the 21st century of information explosion, many people will accidentally fall into the trap of low price and poor quality.
Product Features
1. High chemical stability: It can withstand all strong acids, including aqua regia, hydrofluoric acid, concentrated hydrochloric acid, nitric acid, fuming sulfuric acid, organic acids, strong bases, strong oxidants, reducing agents and various organic solvents. Ideal for high purity chemical feeding use.
2. Low friction coefficient: The friction coefficient is generally only 0.04, which is a very excellent self-lubricating material, and the friction coefficient does not change with temperature. 3
3. Excellent anti-adhesion, the inner wall of the tube is not easy to adhere to colloids and chemicals.
4, excellent aging resistance, can be used outdoors for a long time.
5. Excellent electrical insulation properties: PTFE is a highly non-polar material with good dielectric properties, great resistance, and a dielectric constant of about 2.0, which is the smallest among all electrical insulation materials.
Part of the tube has high transparency and can easily observe the internal fluid condition.
Performance parameters
1. Withstand voltage: 150V-600V
2. Working temperature:-80 ℃ ~ 260 ℃
3. Melting point: 327 ℃
4. Flame retardancy: VW-1
5. Breakdown strength: 26KV/mm
6. Color: transparent, translucent, milky white.
shenzhen dan kai technology, specializing in the production of FEP, PFA, ptfe and other fluorine plastic tube rod sheet membrane products and other insulating materials. Quality first, customer first, sustainable development and excellence are our traditional corporate culture. We deeply understand that responsibility is the guarantee of quality, and quality is the life of the brand. If an enterprise wants to survive for a long time, quality must be put first. Dankai has always adhered to quality as the life of the brand for 11 years.
Shenzhen Dankai has a group of excellent colleagues. The slogan of the production department is to be responsible for the quality of production and to be responsible for itself. Dankai adheres to the slogan of unity of knowledge and practice. Dankai cannot guarantee the lowest price in the whole network, but Dankai assures you that from production to shipment, the quality department checks at every level, and the return rate does not exceed two orders a year. Find Dankai to help you save 40% of the purchase cost.
Teflon (sleeve) tube is made of polytetrafluoroethylene (PTFE commonly known as Teflon, plastic king) material after extrusion sintering, drying, high temperature sintering, stereotypes and other processes made of special pipe. Teflon is also called Teflon, Teflon, Teflon, Teflon, Teflon, Teflon, PTFE, Plastic King, English is Teflon, which is widely used in machinery, electronic appliances, automobiles, aerospace, chemicals, computers, Electric heating, military, communications and other important scientific and technological industries, such as micro transformers.
Shenzhen Dankai Technology Co., Ltd. (ShenZhen DanKai Technology Co., Ltd.), whose predecessor was the Fluoroplastic Material Factory of Dongguan Dandi Insulation Material Co., Ltd. established in 1998, specializes in the research and development, production and sales of FEP, PFA, PTFE and other fluoroplastic tube rod sheet membrane products and other insulation materials. The company has international standards of senior R & D team and the introduction of foreign fluorine plastic products production line. Some fluoroplastic products through ISO9001, SGS, FDA certification, Huawei, Foxconn, the United States, ZTE, Intel, AirTAC and other domestic and foreign cooperation customers fully affirmed. The company's main products are: ① pipes: Ptfe pipes, Fep pipes, Pfa pipes, Pvdf pipes; ② Heat shrinkable tubes: Ptfe heat shrinkable tubes, Fep heat shrinkable tubes, Pfa heat shrinkable tubes, Pvdf heat shrinkable tubes; ③ Plate rod film: Ptfe plate rod film, Feep plate rod film, Pfa plate rod film, Pvdf plate rod film, etc. PE: PE, special, spiral tube, spring tube, rotary cutting tube, welding rod, tee, straight, gasket, joint, cone rod, flared tube, sealing tube, braided tube, corrugated tube, etc. At the same time can be customized according to customer requirements processing production of various specifications of fluorine plastic products.
Key words:
Previous Page
Next Page
Previous Page
Next Page
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
