PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
Teflon tube which is good?
Classification:
Industry dynamics
Author:
PFA tube little sister
Source:
PFA tube little sister
Release time:
2010-05-20
Visits:
Teflon tube which is good
There are many teflon tube production plants, for example: Shenzhen Dankai Technology specializes in producing FEP, PFA, PTFE and other fluorine plastic tube rod sheet membrane products and other insulating materials. Teflon, also known as polytetrafluoroethylene, commonly known as plastic king, F4. The suspended polytetrafluoroethylene resin can be made into plates, turning films and tubes by molding. It can be pressed and pushed into shape, and can be mixed with graphite to make plates, rods, packing, ropes, and raw materials.
Teflon tube performance
The operating temperature range is very wide (from -200 degrees Celsius to 260 degrees Celsius). Kan
2. It is corrosion resistant to basically all chemical substances except some fluorides and alkaline metal liquids. Kan
3. Excellent mechanical properties including aging resistance especially for bending and swinging applications. Kan
4. Excellent flame retardancy (in line with ASTM-D635 and D470 test procedures, it is a flame retardant material in the air. Kan
5. Excellent insulation characteristics (regardless of its frequency and temperature).
6. The water absorption rate is very low, and has a series of unique properties such as self-lubricating and non-stick. Kan
7. Low friction coefficient and wear resistance are very applicable: sealing/gasket, ring material, wear plate/seat, insulation parts, corrosion resistance industry, mechanical parts, lining, petroleum and natural gas, petrochemical industry, chemical industry, instrument and equipment manufacturers, etc. Kan
Specification: special size can be customized
Main purpose:
1, drug-resistant, non-adhesive liquid transfer with machine joint parts cover protection
2. Protection of sensors
3. Non-adhesive metal ball
4. External coating of drugs under high temperature
5. Optical fiber cladding
Due to the excellent performance of Teflon tubes, they are now widely used in all walks of life.
Main parameters
Withstand voltage: 150V-600V
Working temperature:-65 ℃ 260 ℃
Melting point: 327 ℃
Flame retardant: VW-1
Breakdown strength: 45KV/mm
Shenzhen Dankai Technology Co., Ltd. (ShenZhen DanKai Technology Co., Ltd.), whose predecessor was the Fluoroplastic Material Factory of Dongguan Dandi Insulation Material Co., Ltd. established in 1998, specializes in the research and development, production and sales of FEP, PFA, PTFE and other fluoroplastic tube rod sheet membrane products and other insulation materials. The company has international standards of senior R & D team and the introduction of foreign fluorine plastic products production line. Some fluoroplastic products through ISO9001, SGS, FDA certification, Huawei, Foxconn, the United States, ZTE, Intel, AirTAC and other domestic and foreign cooperation customers fully affirmed. The company's main products are: ① pipes: Ptfe pipes, Fep pipes, Pfa pipes, Pvdf pipes; ② Heat shrinkable tubes: Ptfe heat shrinkable tubes, Fep heat shrinkable tubes, Pfa heat shrinkable tubes, Pvdf heat shrinkable tubes; ③ Plate rod film: Ptfe plate rod film, Feep plate rod film, Pfa plate rod film, Pvdf plate rod film, etc. PE: PE, special, spiral tube, spring tube, rotary cutting tube, welding rod, tee, straight, gasket, joint, cone rod, flared tube, sealing tube, braided tube, corrugated tube, etc. At the same time can be customized according to customer requirements processing production of various specifications of fluorine plastic products.
Key words:
Previous Page
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
