PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
What is Teflon tube Teflon tube characteristics and uses
Classification:
Industry dynamics
Author:
Dankai
Source:
Dankai
Release time:
2021-12-07
Visits:
1. Teflon tube/Teflon tube Introduction:
Teflon is also called Teflon, Teflon, Teflon, Teflon, Teflon, Teflon, Teflon, Plastic King, Teflon in English.
Dankai Teflon (sleeve) tube is made of polytetrafluoroethylene (PTFE commonly known as Teflon, plastic king) material after extrusion sintering, drying, high temperature sintering, stereotypes and other processes made of special pipe.
2. Teflon tube/Teflon tube features.
1. High chemical stability: It can withstand all strong acids, including aqua regia, hydrofluoric acid, concentrated hydrochloric acid, nitric acid, fuming sulfuric acid, organic acids, strong bases, strong oxidants, reducing agents and various organic solvents. Ideal for high purity chemical feeding use.
2. Low friction coefficient: The friction coefficient is generally only 0.04, which is a very excellent self-lubricating material, and the friction coefficient does not change with temperature.
3. Excellent anti-adhesion, the inner wall of the tube is not easy to adhere to colloids and chemicals.
4, excellent aging resistance, can be used outdoors for a long time.
5. Excellent electrical insulation performance: Dankai PTFE is a highly non-polar material with good dielectric properties, great resistance, and a dielectric constant of about 2.0, which is the smallest among all electrical insulation materials.
Part of the tube has high transparency and can easily observe the internal fluid condition.
Figure 1: Teflon Tube Source: Dankai
3. Dankai Teflon tube/Teflon tube performance parameters
1. Flame retardancy: VW-1.
2. Breakdown strength: 26KV/mm.
3. Color: transparent, translucent, milky white.
4. Teflon tube Teflon tube/Teflon tube use
Dankai Teflon tubes are widely used in machinery, electronic appliances, automobiles, aerospace, chemicals, computers, electric heating, military, communications and other important scientific and technological industries, such as micro-transformers.
5. Teflon tube specifications
Teflon tube/PTFE tube/PTFE tube/PTFE tube/Teflon tube common specifications: inner diameter * outer diameter (unit: mm) other specifications can be customized
Metric: 2*4 3*5 4*6 5*7 6*8 8*10 8*12 9*12 10*12 12 12*14 14*16*18 18*20
Imperial: 1/8 inch (1.6*3.2)1/4(3.96*6.35)3/8(6.35*9.525)1/2 inch (9.5*12.7)3/4(15.88*19.05)1(22.2*25.4)
Dankai can produce specifications with an inner diameter of 0.5mm to 200mm and a wall thickness of 0.12mm to 3mm.
Shenzhen Dan Kai Technology Co., Ltd., specializing in FEP, PFA, PTFE, PVDF and other fluorine plastic tube rod sheet membrane products and other insulation materials research and development, production, sales and service of intelligent manufacturing enterprises.
ShenZhen DanKai Technology Co.,ltd. is an intelligent manufacturing enterprise specializing in the R & D, production, sales and service of FEP, PFA, PTFE,PVDF and other fluoroplastic tube, bar, sheet and film products as well as other insulating materials.
This article is originally created by Teflon's little sister. Welcome to pay attention and take you to grow knowledge together!
Key words:
Teflon, Teflon, ptfe,12, specification, material, inner diameter, excellent, coefficient of friction
Previous Page
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
