PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
Company Dynamics
03-07
Stainless steel teflon tube
Stainless steel Teflon pipe is also called Teflon metal braided pipe. Its scientific name is polytetrafluoroethylene, and its English names are PTFE and F4. The stainless steel Teflon pipe metal braided hose assembly is a polytetrafluoroethylene inner pipe treated by a special process. The outer jacket and both ends of the stainless steel wire reinforcement layer are composed of metal joints.
03-07
Effect of Teflon Heat Shrinkable Sleeve
Two days ago, Mr. Wan asked Dan Kai for advice on ptfe heat shrinkable tube. He asked that the inner diameter after heat shrinkage should be less than 0.2mm and the outer diameter should not be more than 0.35mm. We are sorry that we could not reach cooperation with Mr. Wan. First of all, the heat shrinkable tube is divided into materials. Teflon heat shrinkable tube is made of pfte, fep and pfa. Secondly, the heat shrinkable tube has production specifications, with the minimum inner diameter of 1mm ~ 150mm and the minimum thickness of 0.1mm ~ 0.5mm.
02-09
Dongguan Teflon Tube Manufacturers
Teflon tube, scientific name Teflon tube (hereinafter referred to as F4 tube, Teflon tube) is a high-quality plunger extrusion tube, using special processing technology, so that the steel tube and plastic tube are closely combined, can bear positive pressure of 1.6Mpa, negative pressure: 77Kpa; It can be used normally at -60 ℃ ~ 260 ℃ and has reliable and excellent corrosion resistance. Transporting strong corrosive gases and liquids at high temperatures, which cannot be replaced by other pipelines. Widely used in machinery, chemical industry, aviation, electrical and electronics, national defense industry, cutting-edge technology, medical and health and electrical insulation and other fields.
02-09
Fluoroplastic bellows manufacturers
Where the molecular structure contains fluorine atoms in the plastic is called fluorine plastic. Fluoroplastics consist of fluorine-containing monomers. Monomers such as tetrafluoroethylene, hexafluoropropylene, chlorotrifluoroethylene, vinylidene fluoride and vinyl fluoride are prepared by homopolymerization or copolymerization. With the continuous development of polymer technology, the variety of fluoroplastics is gradually increasing, and the scope of application is expanding.
02-09
Fluoroplastic bellows manufacturers
Where the molecular structure contains fluorine atoms in the plastic is called fluorine plastic. Fluoroplastics consist of fluorine-containing monomers. Monomers such as tetrafluoroethylene, hexafluoropropylene, chlorotrifluoroethylene, vinylidene fluoride and vinyl fluoride are prepared by homopolymerization or copolymerization. With the continuous development of polymer technology, the variety of fluoroplastics is gradually increasing, and the scope of application is expanding.
02-08
What is the material of the pvdf tube?
PVDF resin has the characteristics of fluororesin and general-purpose resin. It is currently the second largest product in the output of fluoroplastics, with an annual production capacity of more than 43000 tons in the world.
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
