PTFE, PFA, FEP, PVDF Fluoroplastic products industry experts
Teflon double coating pipe model and specification
Classification:
Industry dynamics
Author:
PTFE tube little sister
Source:
PTFE tube little sister
Release time:
2007-12-21
Visits:
Name: Teflon spraying pipe, double-layer spraying pipe, double-layer high-pressure spraying pipe, double-layer paint pipe, high-pressure coating pipe, Teflon anti-static double-layer spraying pipe, corrosion-resistant composite spraying pipe, PE Teflon composite spraying pipe, double-layer automobile painting pipe, electrostatic painting perfluorinated pipe, electrostatic painting pipe, Teflon double-layer coating pipe
Technical parameters:
Inner layer: PTFE (Teflon tube)
Outer layer: polyethylene resin (PE pipe)
Temperature range:-20 ℃ ~ 60 ℃
Working pressure: 5bar
Length: 100/m a roll
Product Description:
The contact liquid layer uses fluorine resin, which corresponds to oily and water-based coatings.
The internal fluorine makes the internal surface less obstructed and shortens the switching color time.
Better resistance to damage after bending than previous fluorine products
The internal fluorine hindrance is small, shorten the color change time.
The outer layer is attached to polyamide resin, which is more flexible and workable than the previous product.
Short installation time, not easy to break
Figure 1: Teflon double-layer coating pipe Source: Shenzhen Dankai
Teflon is made of high quality PTFE material extrusion expansion, with outstanding wear resistance, oil resistance, chemical corrosion resistance and high temperature performance. It is suitable for the occasion where high temperature is required, for the insulation protection and pressure relief of the connection welding place and the area identification of the covered components.
This coating pipe is a special conveying pipe for double-layer paint (inner Teflon solvent resistance, strong acid and alkali resistance or nylon outer PE). It is solvent resistant, explosion-proof, easy to clean, good flexibility, good insulation performance, effectively preventing high voltage leakage, corrosion resistance, high temperature resistance and wear resistance.
Features:
1, softness and elasticity;
2. High temperature working conditions in summer can also ensure that it is not weak and flexible;
3, the pressure tolerance is good, will not appear due to the sudden start of the air compressor powder tube shrinkage phenomenon;
4. The inner wall is smooth, non-sticky powder, and the powder is kept smooth;
5, with anti-static function, to maintain a balanced, consistent powder flow without friction static electricity. Kan
Common Specifications of 2. Teflon Double Coating Pipe:
Teflon PE double-layer paint pipe: 4*6 6*12mm;5*6 6*10mm;5*6 6*12mm
Special specifications customers can be customized in advance according to their own needs.
Application of Teflon double-layer coating pipe: It is most suitable for explosion-proof effect in various flammable and explosive places, such as PU coating, UV coating, paint, gum, chemicals, etc. Adjusting the air pressure can realize stepless speed regulation of the transmission volume. Reliable work and will not be damaged due to dry operation or accidental shutdown; In addition, the structure is simple, the wearing parts are few, and the installation and maintenance are convenient. Widely used in manual spray gun, automatic spray gun, pressure barrel, robot, furniture factory paint, automatic spraying machine supporting oil supply system, etc.
Teflon double-layer coating pipe manufacturers
Shenzhen Dankai Technology Co., Ltd. (ShenZhen DanKai Technology Co., Ltd.), whose predecessor was the Fluoroplastic Material Factory of Dongguan Dandi Insulation Material Co., Ltd. established in 1998, specializes in the research and development, production and sales of FEP, PFA, PTFE and other fluoroplastic tube rod sheet membrane products and other insulation materials. The company has international standards of senior R & D team and the introduction of foreign fluorine plastic products production line. Some fluoroplastic products through ISO9001, SGS, FDA certification, Huawei, Foxconn, the United States, ZTE, Intel, AirTAC and other domestic and foreign cooperation customers fully affirmed. The company's main products are: ① pipes: Ptfe pipes, Fep pipes, Pfa pipes, Pvdf pipes; ② Heat shrinkable tubes: Ptfe heat shrinkable tubes, Fep heat shrinkable tubes, Pfa heat shrinkable tubes, Pvdf heat shrinkable tubes; ③ Plate rod film: Ptfe plate rod film, Feep plate rod film, Pfa plate rod film, Pvdf plate rod film, etc. PE: PE, special, spiral tube, spring tube, rotary cutting tube, welding rod, tee, straight, gasket, joint, cone rod, flared tube, sealing tube, braided tube, corrugated tube, etc. At the same time can be customized according to customer requirements processing production of various specifications of fluorine plastic products.
Shenzhen Dankai Technology Co., Ltd. specializes in the research and development and sales of fluorine plastic materials. It has advanced equipment and senior research and development teams. It has cooperation with Huawei, Midea, ZTE, Intel, AirTAC, and Foxconn. The company's main products are PTFE tubes, polytetrafluoroethylene propylene tubes, soluble polytetrafluoroethylene, and polyvinylidene fluoride. At the same time, it can process and produce various specifications of fluorine plastic products according to customer requirements.
Key words:
Previous Page
Next Page
Previous Page
Next Page
Dankai Technology
Address: Area B, 4th Floor, Building 1, North Yongfa Science and Technology Park, Yanchuan North, Chaoyang Road, Songgang Town, Bao'an District, Shenzhen, China
Tel: +86-755-29979617 23127719 23127819
E-mail: dkt@szdankai.com
Focus on us
Copyright©2024 All rights reserved of Shenzhen Dankai Technology Co., Ltd.
